Roger Beep (End Of Transmission) Tone; Call Alert Selection; Silent Operation - Midland LXT600 SERIES Owner's Manual

VOX will be more sensitive on the "1" setting than on the "3" setting.
To turn VOX off, press the MENU button until the display shows
"VOX" blinking while on the right of the CHANNEL NUMBER display,
a "1","2" or "3" icon appears. Select "oF" by pressing the ▲\▼ buttons
and push the PTT key, or press the MENU button again to move to
the next feature setting.

ROGER BEEP (end of transmission) TONE

When the PTT button is released, the radio will beep to confirm to
other users that your transmission has finished.
To turn the ROGER BEEP tone on, press the MENU button until the
display shows a "rb" icon while on the right of the "rb" display, an "oF"
icon appears. Select "on" by pressing the ▲\▼ buttons and push
the PTT key, or press the MENU button to move to the next feature
setting.
To turn the ROGER BEEP tone off, press the MENU button until the
display shows a "rb" icon while on the right of the "rb" display, an "on"
icon appears. Select "oF" by pressing the ▲\▼ buttons and push
the PTT key, or press the MENU button to move to the next feature
setting.

CALL ALERT SELECTION

Your LXT600 Series has 5 selectable CALL ALERTS.
To select, press the MENU button until a "CA" icon appears and to the
right of the "CA" icon the current CALL ALERT setting is displayed.
Then press the ▲\▼ buttons to make the CALL ALERT selections -
the radio will emit a corresponding tone for each selection. To confirm,
press the PTT button or press the MENU button to move to the next
feature setting.

SILENT OPERATION

Your LXT600 Series has a SILENT OPERATION mode. In this mode,
all "beeps" and "tones" are disabled.
To turn the SILENT OPERATION mode on, press the MENU button
until the display shows a "bP" icon while on the right of the "bP"
display, an "on" icon appears. Select "oF" by pressing the ▲\▼
buttons and push the PTT key or MENU button.
To turn the SILENT OPERATION mode off, press the MENU button
until the display shows a "bP" icon while on the right of the "bP"
display, an "oF" icon appears. Select "on" by pressing the ▲\▼
buttons and push the PTT key or MENU button.