Roger Beep (End Transmission Tone); Keypad Beep; Maintenance - Midland G15 Instruction Manual

The Battery power saving feature enables a reduction in consumption of up
to 50%. If it has been set, it automatically activates when the transceiver does
not receive any signal for more than 5 seconds. Power sav can be disabled
through Programming software.

Roger Beep (End transmission tone)

When the PTT button is released, the radio will beep to confirm to other
users
The Roger Beep can be enabled through the programming software.

Keypad Beep

If this function is active, you will hear a beep tone every time you press
a button (It can be disabled through the programming software).
V
The VOX feature enables hands free conversation without using PTT
ust speak in the direction of the microphone
and the communication will automatically activate The VOX sensitivity can
be adjusted in 10 different levels (0,1,2,3...9) through the programming
software:
0 means that the VOX is turned off, evel 1 is set by default and has the
lowest VOX sensitivity, 9 is the highest one.
To activate the VOX feature, keep pressed for about 4 sec.
With the programming software you can enable/disable the VOX feature
and select the sensitivity levels.

Maintenance

Your G15 designed to fulfill any warranty obligations and
to
As all electronic devices, we recommend ollow th s few
suggestions:
| Midland G15 instruction guide