External Speaker/Microphone Jack - Midland LXT600 SERIES Owner's Manual

To confirm, press the PTT button or press MENU. The radio will
return to WX BAND and the WX BAND icon will continue blinking.
If the radio receives a WX ALERT signal from a designated NOAA
station while on GMRS/FRS Radio mode, the radio will beep for
10 seconds while an "AL" and "In" icon appear on the display, after
which it will automatically go to WX BAND.
If any button is pressed during beeping while on GMRS/FRS Radio
mode, the radio will automatically go to WX BAND.
To turn the NOAA WEATHER (WX) ALERT off, press the MENU
button twice while in WX Band. The display shows "AL," while on the
right an "on" icon appears blinking. Select "oF" by pressing the ▲\▼
!
buttons. To confirm, press the PTT button or press MENU.
Note : The WX Alert is automatically ON during WX SCAN
mode.

EXTERNAL SPEAKER/MICROPHONE JACK

Your LXT600 Series can be used with an optional external speaker/
microphone or headset, freeing your hands for other tasks. To use
an optional speaker / microphone or headset:
l Insert the plug(s) into the SPK/MIC jacks.
l Place the earbud into your ear, and adjust the mic
into your desired position.
Note : You can charge a rechargeable NiMH
battery pack thru the CHG Jack.