Lxt600 Series Quick Reference Chart; Monitor; Scan; Keypad Lock - Midland LXT600 SERIES Owner's Manual

LXT600 SERIES QUICK REFERENCE CHART

MENU
Channel
1~36

MONITOR

Pressing and holding the MONITOR button for 3 seconds will let you
hear noise so you can adjust the volume level of the radio when not
receiving a signal. This could also be used to check any activity on
your current channel before transmitting.
Press and hold the MONITOR button for 3 seconds again to get out
of MONITOR mode.

SCAN

Your LXT600 Series can scan all 36 channels for activity. To enter,
quickly press the SCAN button. Repeat the same procedure to exit.
Your radio will rapidly scan each of the 36 channels and stop on any
active channel for 4 seconds before resuming scan.
When you press the PTT button to transmit on an active channel,
the scanning function will stop and remain on the active channel. To
resume scanning, quickly press the SCAN button.
CALL ALERT
Your LXT600 Series can transmit a call alert for a fixed length of
time. To send a call alert, press the CALL button. The TX icon will
appear while transmitting a call alert and a tone can be heard on the
speaker for confirmation.

KEYPAD LOCK

To avoid accidentally changing the radio setting, press the LOCK
button for 4 seconds. The KEY LOCK icon will appear on the
display. PTT and CALL will still be active. Repeat the same
procedure to unlock the keypad.
CHANNEL SELECTION (GMRS/FRS BAND)
Press the MENU button once, and then the ▲\▼ buttons to select
one of the 36 GMRS/FRS channels. To confirm the selection, press
the PTT button or press the MENU button again to move to the next
feature setting.
Power
Privacy
H/L
CTCSS oF~38
oF~83
DCS
Roger Beep
VOX
oF/1/2/3
On/Off
WX Scan
Press and hold UP/WX
button for 5 seconds
1~10
Call Alert
Silent Operation
1~5 On/Off
WX Alert
WX Channel
On/Off
1~10