Optical Digital Output Signals; Operating Jvc's Tvs Using The Remote Control - JVC UN-AD8 Instructions Manual

OPTICAL DIGITAL OUTPUT Signals

DIGITAL AUDIO
Playback disc
DVD Video
with 48 kHz, 16/20/24 bit Linear PCM
with 96 kHz, Linear PCM
with Dolby Digital
with DTS
2
DVD Audio*
with 48/96/192 kHz, 16/20/24 bit
Linear PCM
with 44.1/88.2/176.4 kHz,
16/20/24 bit Linear PCM
with Dolby Digital
with DTS
DVD-VR format discs
with 48 kHz, 16/20/24 bit Linear PCM
with Dolby Digital
SVCD, VCD, CD
CD with DTS
MP3/WMA/DivX disc
MPEG-4 disc
1
* While playing some DVDs, digital signals may be emitted at 20 bits or 24 bits (at their original bit rate) through the DVD OPTICAL
DIGITAL OUT terminal if the discs are not copy-protected.
2
* While playing some DVD Audio discs, digital signals may not be emitted through the DVD OPTICAL DIGITAL OUT terminal if the
discs are processed with CPPM (Content Protection for Prerecorded Media).

Operating JVC's TVs Using the Remote Control

Remote control
TV CH /
SHIFT
40
OUTPUT
STREAM/PCM
DTS bitstream
DTS bitstream
44.1 kHz, 16 bit Linear PCM/48 kHz, 16 bit Linear PCM
DTS bitstream
TV
TV/VIDEO
TV VOLUME
+/–
Output Signals
DOLBY DIGITAL/PCM
48 kHz, 16 bit Linear PCM*
48 kHz, 16 bit Linear PCM
Dolby Digital bitstream
48 kHz, 16 bit Linear PCM
48 kHz, 16 bit Linear PCM
44.1 kHz, 16 bit Linear PCM
Dolby Digital bitstream
48 kHz, 16 bit Linear PCM
48 kHz, 16 bit Linear PCM*
Dolby Digital bitstream
44.1 kHz, 16 bit Linear PCM
32/44.1/48 kHz, 16 bit Linear PCM
32 kHz, 16 bit Linear PCM
You can use the remote control to operate JVC's TVs.
TV
While holding SHIFT, press...
TV CH /
TV VOLUME +/–
TV/VIDEO
PCM ONLY
1
48 kHz, 16 bit Linear PCM
48 kHz, 16 bit Linear PCM
1
48 kHz, 16 bit Linear PCM
Turn on/off TV.
Change the channels.
Adjust the volume.
Change the input mode.