Samsung RH60H8160SL User Manual page 23

1. Adjust the height of the door by turning the
adjustment nut ( B ) in the counterclockwise
direction ( ) with a spanner.
(Turn it in the counterclockwise direction (
to increase the height of the door and in the
clockwise direction (
- Open the door and adjust it from the inside.
( A )
2. Once the doors are level, turn the clamping nut
( A ) in the counterclockwise direction (
tighten it.
( A )
Adjusting the level when the refrigerator
is empty can result in the refrigerator
becoming uneven again once items have
been placed inside.
If this occurs, adjust the level again.
DA68-03015D-07.indb 23
HOW TO ADJUST THE DOOR GAP
If the gap between the refrigerator door and the
freezer door is uneven:
)
) to decrease it.)
• Use the gap adjustor located at the top of the
• Excessive force can cause the adjustor bolt to
1. Remove the refrigerator
- Detach the hinge cover with
) to
2. Adjust the gap using a 4 mm Allen wrench (not
3. Rotate the bolt in the clockwise direction (
CAUTION
English - 23
refrigerator door (right side).
break.
door's hinge cover.
the door open and then close
the door once the hinge cover
has been detached.
included).
to widen the gap.
Rotate it in the counterclockwise direction
( ) to narrow the gap.
Adjust until the gap between the refrigerator
door and the freezer door appears even.
When arranging the cables, take caution
not to tear or peel off the cable coating.
)
2016. 3. 24. 10:33