Stereo Input Channel - Wharfedale Pro R1604 Operating Manual

.5.
16
17
15
R1604 & R2004

Stereo Input Channel

The R1604/2004 stereo channel features two unbalanced line level
,,
inputs with 1/4 jacks for left and right signals. These inputs can be
used as both Stereo and Mono inputs. When using them with a
mono source then the left input should be used. The stereo input
channels are designed for use with any line level sources such as
CD players and EFX units. Each stereo input channel features a
three band EQ section, the Hi EQ control has an upper shelf limit of
12kHz, the Mid EQ 2.5kHz and the Low EQ 80Hz. The AUX sends
are the same as for mono channels.
15. Stereo Input: Left and Right Input sockets.
16. Left (Mono) Input: When the left input is connected only, then the
Channel operates in mono.
17. The Level button: This button lets you choose between the two
standard operating level -10dBV and +4dBu. It is important to check the
,
incoming device s operating level and choose the appropriate level on
The channel Input.
R Series Mixers