Table of Contents
Advertisement
OPERATING MANUAL AND USER GUIDE
MONO CHANNEL WALKTHROUGH
STEREO CHANNEL WALKTHROUGH
7
.
Balanced XLR input for connecting microphones
2.
Balanced/Unbalanced TRS input for line level sources
2
3.
Gain control for calibrating sources and applying correct gain
structure
3
4.
High EQ centred at 2KHz
5.
Mid EQ centred at KHz
4
6.
Low EQ centred at 80Hz
5
7.
Sends to the internal FX engine or to effect
6
8.
HPF with 80Hz cutoff point
7
8
9.
Used to spatially place the channel within the stereo field
9
0. Sets the amount of signal sent to the main output bus
0
. Clip LED. Shows when clipping is occurring
.
Balanced/Unbalanced TRS input for the left channel or mono
line level sources
2.
Balanced/Unbalanced TRS input for the right channel of stereo
line level sources
2
3.
FX to FX send or to effect
4.
Select +4/-0dBu switch
3
4
5.
Used to spatially place the channel within the stereo field
5
6.
Sets the amount of signal sent to the main output bus
6
Hide quick links:
Advertisement
Table of Contents
