OPERATING MANUAL AND USER GUIDE
MONO CHANNEL WALKTHOUGH
2
3
4
5
6
7
8
9
STEREO CHANNEL WALKTHOUGH
2
3
4
5
6
7
8
7
.
Balanced XLR input for connecting microphones
2.
Balanced/Unbalanced TRS input for line level sources
3.
Gain control for calibrating sources and applying correct gain structure
4.
Clip LED. Shows when clipping is occurring
5.
High EQ centred at 2KHz
6.
Mid EQ centred at 1KHz (Connect 802 only)
7.
Low EQ centred at 80Hz
8.
Used to spatially place the channel within the stereo field
9.
Sets the amount of signal sent to the main output bus
.
Balanced/Unbalanced TRS input for the left channel or mono line level
sources
2.
Balanced/Unbalanced TRS input for the right channel of stereo line
level sources
3.
Gain control for calibrating sources and applying correct gain structure
(Connect 802 only)
4.
High EQ centred at 12KHz (Connect 802 only)
5.
Mid EQ centred at 1KHz (Connect 802 only)
6.
Low EQ centred at 80Hz (Connect 802 only)
7.
Used to spatially place the channel within the stereo field
8.
Sets the amount of signal sent to the main output bus