Olympus SP-S6SUZ Instruction Manual page 60

Using the alarm [ALARM CLOCK]
\1'
SETUP
~
ALARM
CLOCK
I
When
[E9]
has not been set, [ALARM CLOCK] is not available.
t
When [DUALTIME] (p. 59) is set to [ON], the alarm is activated at the date and time set in
[DUALTIME].
OFF
The alarm is canceled.
ONETIME
TIME (Proceeds to the
setting screen'I.)
1-----:::----+---------lThe alarm is activated once according to the time,
f-S_N_O_O_Z_E_·2 _ _--j---:O---:F_F_JO_N ---ithe sound type and the volume settings that are
SOUND TYPE
1/2/3
made here.
VOLUME LOW/HIGH
DAILY
(Submenus 3 and 4 can be set in the
same way as [ONE TIME].)
The alarm is activated daily at the same settings.
'1
The setting procedure is identical to that in "Setting the date and time" (p.12)
'2 In this setting, even if the alarm is stopped once, the alarm will be activated every 5 minutes, up to 7 times.
t;
To check the alarm time, press the
DISP.
button while the camera is turned off. The current and
alarm set times are displayed for approx. 3 seconds.
To activate the alarm
After making the detailed settings of
[ONE TIME] or [DAILY], press the
POWER
button to turn off the camera.
To stop the alarm
When the alarm is activated, press any button
to shut off the alarm and turn off the camera.
1)
When [SNOOZE] is set to [OFF], the alarm
stops automatically and the camera turns off
after 1 minute of no operation.
Selecting
a
video signal system
to
match your TV [VIDEO OUT]
\1'
SETUP
~
\tIDEO OUT
t
The TV video signal system varies depending on the countries and regions. Before viewing camera
, images on your TV, select the video output according to your TV's video signal type.
NTSC
PAL
Connecting the camera to a TV in North America, Taiwan, Korea, Japan, etc.
Connecting the camera to a TV in European countries, China, etc.
/; The factory default settings differ according to the region where the camera is sold.