Welch Allyn Valueteam 3060 User Manual page 70

STX/ETX:
STX Prefix Code ID
Data flow control of Start of Transmission (STX) and End of Transmission (ETX) must be set to match the host terminal.
Prefix and Suffix Code ID:
STX Prefix Code ID
The scanner can be programmed to send characters that identify the symbology being scanned. These characters are
programmed in the Prefix and/or Suffix Code ID. For further information about programming the Prefix or Suffix Code ID, see page
5 - 16.
5
ETX:
STX Prefix Code ID
Data flow control of End of Transmission (ETX) and Start of Transmission (STX) must be set to match the host terminal.
Record Suffix:
STX Prefix Code ID
The Record Suffix selection is used to send commonly used suffix characters, e.g., Enter, Tab, or Space, to the host terminal. (See
page 5 - 7 for a Hex to ASCII conversion chart.)
5 12
Message String Descriptions
Scanned Data Suffix Code ID
Scanned Data Suffix Code ID
Scanned Data Suffix Code ID
Scanned Data Suffix Code ID
ETX Record Suffix
ETX Record Suffix
ETX Record Suffix
ETX Record Suffix