Welch Allyn Valueteam 3060 User Manual page 19

To program each option, you must:
Scan the Enter Programming bar code on the
1
Programming page.
Enter the option mode by scanning the Option bar
2
code (also on the Programming page).
Enter programming mode
1
Enter option mode
2
6
To the right of the option bar code, the necessary
3
alphanumeric inputs
4
alphanumeric entries from the back fold out page. If
required, scan the Finish bar code on the back fold out
5
page.
Once you have finished programming, scan the Exit
6
Programming bar code, listed on the lower right hand
corner of each Programming page.
Choose option
3
Scan EXIT PROGRAMMING
are listed. Scan these
Scan option(s)
4
5
Scan FINISH
(if necessary)
1 7
1