Table of Contents
Advertisement
UK/Plessey Settings
UK/Plessey: The UK/Plessey bar code has 16 data characters, including the digits 0 through 9, and the capital letters A through F.
Furthermore, you can program the scanner to transmit a check digit to the host computer.
UK/Plessey Minimum and Maximum Length: This selection is used to set the valid reading length of the bar code. If the data
length of the scanned bar code doesn't match the valid reading length, the 3060/3080 will issue a long error beep. You may wish to
set the same value for minimum and maximum length to force the scanner to read fixed length bar code data. This helps reduce the
chances of a misread.
7
7 30
Advertisement
Table of Contents
