Date & Time - HP Photosmart M415 User Manual

Date & Time
This setting allows you to set the date/time format, as well
as the current date and time for the camera. This is
usually done when you first set up the camera; however,
you may need to reset the date and time when you are
traveling to different time zones, after the camera has
been without power for an extended time, or if the date
or time is incorrect.
The date/time format chosen will be used to display the date
information in Playback. Also, the format chosen in this
setting is what is used in the Date & Time Imprint feature (see
Date & Time Imprint on page 52).
1. In the Setup Menu (page 85), select Date & Time.
2. In the Date & Time sub-menu,
adjust the value of the
highlighted selection by using
the
3. Press the
the other selections.
4. Repeat steps 2 and 3 until the
correct date/time format, date, and time are set.
5. Press the
the Setup Menu.
The date/time format setting remains in effect until it is
changed again, even when you turn the camera off. The
date and time settings also remain current as long as the
camera batteries that are installed have a charge, or
batteries are removed for less than 10 minutes, or the
camera is connected to an optional HP AC power adapter.
Downloaded from ManualsCamera.com Manuals
buttons.
buttons to move to
button to save the setting and return to
Using the Setup Menu 89