HP Photosmart M415 User Manual page 111

Problem
The camera
does not take
a picture when
I press the
Shutter button
(continued).
The Image
Display is not
working.
My image is
blurry.
Downloaded from ManualsCamera.com Manuals
Possible Cause
The flash is
recharging.
The camera is
set to the Macro
shooting
mode and
cannot take a
picture until it
finds focus.
The camera is
still saving the
last picture
you took.
The charge in
the batteries is
too low, the
batteries are
completely
drained, or the
camera has
stopped
working.
The light is low
and the flash
is set to
Flash Off
Troubleshooting and Support
Solution
Wait until the flash has
recharged before taking
another picture.
• Re-focus the camera (try
using Focus Lock; see
page 37).
• Make sure the subject of the
picture is within the Macro
(close-up) range (see
page 42).
Wait a few seconds for the
camera to finish processing the
last image before taking
another picture.
• Replace or recharge the
batteries. If the Image
Display does not turn on,
remove the batteries and
connect to the HP AC
power adapter to see if the
Image Display turns on.
• If the Image Display does
not turn on, reset the
camera (see page 96).
In dim light, the camera
requires a longer exposure. Use
a tripod to hold the camera
steady, improve lighting
conditions, or set the flash to
Flash On (see page 40).
111