HP Photosmart M415 User Manual page 109

Problem
The camera
does not
respond when
I press a
button.
Downloaded from ManualsCamera.com Manuals
Possible Cause
The camera is
turned off or has
shut down.
The camera is
connected to a
computer.
The camera is
processing an
image.
The batteries
are drained.
The optional
memory card is
not a supported
card or is
corrupted.
The camera has
stopped
operating.
Troubleshooting and Support
Solution
Turn on the camera, or turn it
off and then on again.
Most of the camera buttons do
not respond when the camera
is connected to a computer. If
they respond, it is only to turn
on the Image Display if it is off,
or, in some cases, turn off the
Image Display if it is on.
Wait until the Memory light
turns off, indicating the camera
has completed processing the
previously-taken image.
Replace or recharge the
batteries.
Ensure that the memory card is
the proper type for your
camera (see page 166). If the
card is the proper type, turn off
the camera, remove the
memory card, turn on the
camera, and see if the camera
responds when you press a
button. If so, then the card is
probably corrupted. Replace
the memory card.
Reset the camera (see
page 96).
109