Connect Hubs At 10/100 Mbps - NETGEAR DS 104 Installation Manual

Connect Hubs at 10/100 Mbps

10 or 100 Mbps Transmission with the Hub
Two Model DS104 hubs, two Model DS106 hubs, two Model DS108 hubs, two
Model DS116 hubs, or a combination of DS100 Series hubs can be daisy-
chained together at 100 Mbps to support a growing number of PCs. For larger
networks, use a 10/100 Mbps switch such as the NETGEAR Model FS104
switch, as shown in the illustration below.
Model DS104 hub
DUAL SPEED HUB DS104
1 10 20
Pow Col Utilization%
PCs
DUAL SPEED HUB DS116
Power
Collision
1 2 3 4 5
The following illustration shows a two-hub daisy-chain configuration. This
illustration shows the Model DS104 hub and the Model DS116 hub daisy-
chained together. You can use any two DS100 Series hubs in this configuration.
Model DS104/106/108/116 Dual Speed Hub Installation Guide
Switched network with Model DS104, Model DS108,
and Model DS116 hubs
Server
DUAL SPEED
100M 10M
On - Link Blinking = Receive
100 Mbps
Normal/Uplink
>40
10 Mbps
1 2 3 4
Model DS116 hub
Auto 10/100 Mbps DUAL SPEED 10M Link Activity 100M Link Activity
Normal/Uplink
6 7 8 9 10 11 12 13 14 15 16
PCs
Model DS104 and Model DS116 hubs
daisy-chained
DUAL SPEED
DUAL SPEED HUB DS104 100M 10M
On - Link Blinking = Receive
100 Mbps
1 10 20 >40
10 Mbps
Pow Col Utilization%
1 2 3 4
DUAL SPEED HUB DS116
Auto 10/100 Mbps DUAL SPEED
10M Link Activity 100M Link Activity
Power
Collision
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Model FS104
10/100 Mbps
switch
Model DS108 hub
PCs
9093FA
Normal/Uplink
Normal/Uplink
9110FA