NETGEAR DS108 Installation Manual
  1. Manuals
  2. Brands
  3. NETGEAR Manuals
  4. Switch
  5. DS108 - Hub
  6. Installation manual

NETGEAR DS108 Installation Manual

Dual speed hub
Hide thumbs Also See for DS108:

Advertisement

Table of Contents

See also: Installation Manual

Advertisement

Table of Contents
loading

Related Manuals for NETGEAR DS108

Summary of Contents for NETGEAR DS108

  • Page 2: Start Here

    10 and 100 Mbps users. The Model DS108 hub is ideal for small networks in transition from 10 to 100 Mbps and for linking networks operating at different speeds.

  • Page 3: Package Contents

    Wall mount hardware • Rubber footpads for tabletop installation • Warranty & Owner Registration Card • Power adapter Caution: Use the appropriate power cord as required by your national electrical codes and ordinances. Model DS108 Dual Speed Hub Installation Giude...

  • Page 4: Typical Applications

    Model RT328 ISDN Router 100 Mbps 10 Mbps Power Servers user 8228FA Product Illustration Front Panel of the Model DS108 Hub 100 Mbps Collision LED vista RJ-45 100 Mbps network ports Utilization LEDs DS108 DUAL SPEED HUB DUAL SPEED Auto 10/100 Mbps...
  • Page 5 RJ-45 network ports 100M 8152FA Rear Panel The rear panel of the Model DS108 hub has a ground clip and a receptacle for the power adapter. Rear Panel of the Model DS108 Hub 5 Vdc 800 mA Ground clip Power...

  • Page 6: Installation Procedures

    Using the slots on the bottom of the hub, hang the hub on the wall. Connect the power cord(s) first to the power entry receptacle on the hub rear panel and then to the wall. Model DS108 Dual Speed Hub Installation Giude...

  • Page 7: Connect A Pc To The Hub

    The Normal/Uplink push button on the front panel of the hub allows you to select the Uplink (MDI) or Normal (MDI-X) position for port 8 on the Model DS108 hub. All other ports are wired Normal for direct connection to PCs.

  • Page 8: Connect Hubs At 10/100 Mbps

    10 or 100 Mbps Transmission with the Hub Two Model DS108 hubs can be daisy-chained together at 100 Mbps to support more than eight PCs. For larger networks, use a 10/100 Mbps switch such as the NETGEAR Model FS104 switch.

  • Page 9: Verify The Installation

    The figures illustrate the use of straight-through and crossover twisted pair cables. Straight-through Uplink or Normal or twisted pair cable MDI port MDI-X port Normal or Normal or Crossover MDI-X port MDI-X port twisted pair cable 8146EB Model DS108 Dual Speed Hub Installation Giude...

  • Page 10: Troubleshooting Information

    Ensure that the PC at the far end is set to half-duplex mode and is operating properly. Problems with Normal/Uplink Check the Normal/Uplink push button on the front panel. port 8 push button in the wrong position Model DS108 Dual Speed Hub Installation Giude...

  • Page 11: Technical Specifications

    EN 55 022 (CISPR 22), Class A VCCI Class 1 Safety Agency Approvals CE mark, commercial Power adapter UL listed cUL listed CSA certified TUV licensed T-Mark Warranty Information 5 years Power adapter 1 year Model DS108 Dual Speed Hub Installation Giude...
  • Page 12 Certificate of the Manufacturer/Importer It is hereby certified that the Model DS108 Dual Speed Hub has been suppressed in accordance with the conditions set out in the BMPT-AmtsblVfg 243/1991 and Vfg 46/1992. The operation of some equipment (for example, test transmitters) in accordance with the regulations may, however, be subject to certain restrictions.

  • Page 13: Customer Support

    4401 Great America Parkway Santa Clara, CA 95054 USA Phone: 888-NETGEAR Customer Support Phone U.S./Canada: 800-211-2069 Europe: 171-571-5120 Australia: 800-142-046 United Kingdom: 171-571-5120 France: 0800-90-2078 Germany: 0130-817305 New Zealand: 800-444-626 Korea: 00308-11-0319 Internet/World Wide Web http://NETGEAR.baynetworks.com. The NETGEAR web page is at *M-DS108NA-0*...

Table of Contents