Panasonic SC-TM910DVD Service Manual page 52

Step 4 Remove the traverse deck.
Note: As floating springs (4 pieces) come off at the same time,
be careful not to lose them.
Step 5 Remove 4 screws.
Step 6 Remove the DVD Servo P.C.B. and turn it over.
Note: Insert a short pin into FFC of the optical pickup.
Step 7 Rotate the traverse deck (B) to the arrow direction and
shift the optical pickup to the furthest backward.
Step 8 Remove the catch of the drive rack, and take out the
drive rack.
Step 9 Place the convex part of an optical pickup to the
concave part of a traverse base, then take out the optical
pickup.
52
manual de servicio SC-TM910DVD