Panasonic SC-TM910DVD Service Manual page 38

Error Code Diagnosis Contents Description of error
LOAD Tray drive assembly
abnormal
PDRV Cam gear/gear
assembly abnormal
UDU UD base asssembly
abnormal
UDD UD base asssembly
abnormal
UD1 UD base asssembly
abnormal
F1NG Fail - safe mode. (For
open/close tray
unit(s))
F2NG Fail - safe mode. (For
open/close tray
unit(s))
SRVC_TRV To unlock the
traverse unit for
service
RSET Cam gear jam/close
sensor faulty
CRS1D Error Code display
1. The errors that occured in CRS1D Mechanism can be recalled and displayed, in the order of the occurence under self-
diagnostic (Refer to Section 10.3 for procedures to enter this mode.
• Only the first 5 errors will be memorized (in backup memory). The subsequence error shall be ignored and not memorize.
Tray unit does not move
from "STOCK" to "PLAY"
position
Cam gear does not
move from "HOME" to
"PLAY" drive position.
UD Base assembly does
not move upwards from
tray 5 to tray 2
UD Base assembly does
not move downwards
from tray 1 to tray 5.
UD Base assembly does
not move to tray 1.
When the tray open
operation is performed, it
fails to open. It will
automatically close all
trays after the time-out
by the microprocessor.
During this time when it
fails, the error code will
appear.
When the tray close
operation is performed, it
fails to close. It will
automatically open all
trays after the time-out
by the microprocessor.
During this time when it
fails, the error code will
appear.
1. All trays set to
"STOCK" position
2. Mechanism set to
tray 5
3. Cam gear set to
"HOME" position
During tray re-open, the
cam gear will rotate in
the opposite direction to
reset the cam gear
position. When it fails,
the error code will
appear.
38
manual de servicio SC-TM910DVD
Automatic FL Display Remarks
For CD/DVD changer unit (CRS1D).
Press [SINGLE CHANGE] on main unit
for next error.
For CD/DVD changer unit (CRS1D).
Press [SINGLE CHANGE] on main unit
for next error.
For CD/DVD changer unit (CRS1D).
Press [SINGLE CHANGE] on main unit
for next error.
For CD/DVD changer unit (CRS1D).
Press [SINGLE CHANGE] on main unit
for next error.
For CD/DVD changer unit (CRS1D).
Press [SINGLE CHANGE] on main unit
for next error.
For CD/DVD changer unit (CRS1D).
Press [SINGLE CHANGE] on main unit
for next error.
For CD/DVD changer unit (CRS1D).
Press [SINGLE CHANGE] on main unit
for next error.
For CD/DVD changer unit (CRS1D).
Press [SINGLE CHANGE] on main unit.
For CD/DVD changer unit (CRS1D).
Press [SINGLE CHANGE] on main unit
for next error.