Panasonic SC-TM910DVD Service Manual page 27

Item
Mode Name Description
Initial setting of Initial setting of laser drive current.
laser drive current Initial current value for each of
DVD laser and CD laser is
separately saved in the EEPROM
IC.
ECC error display ECC decode error display.
Time 1 check Timer 1 check.
Laser operation time is measured
separately for DVD laser and CD
laser.
Press "FL Display" button for next
page of FL Display (to show CD
laser time).
Timer 1 reset Timer 1 reset.
Laser operation time of both DVD
laser and CD laser is reset all at
once.
Timer 2 check Timer 2 check.
Spindle motor operation timer.
Press "FL Display" button for next
page of FL Display.
Timer 2 reset Timer 2 reset.
Spindle motor operation timer.
FL Display
1. For DVD/CD drive current mode
2. The measurement value (In decimal
notation)
The value denotes the current in decimal
notation. The above example shows the
initial current 20mA and 23mA for DVD
laser and CD laser respectively when the
laser is switched on.
Shown to the left is DVD laser time, and to
the right CD laser time.
Time is shown in 4 digits of decimal notation
in a unit of 10 hours.
"0000" will follow "9999".
T1_0000/0000 (display1/display2)
Shown to the left is DVD laser time, and to
the right CD laser time.
Time is shown in 4 digits of decimal notation
in a unit of 10 hours.
Time is shown in 5 digits of decimal notation
in a unit of 10 hours.
"0000" will follow "9999".
Time is shown in 5 digits of decimal notation
in a unit of 10 hours.
27
manual de servicio SC-TM910DVD
Key Operation
Remote Control Key
In STOP (no disc) mode, press STOP
button on the player, and PAUSE button on
the remote control unit.
Cancelled automatically 5 seconds later.
Press "FL Display" button on remote
control unit for next page (FL Display) on
values of laser drive current.
In STOP (no disc) mode, press STOP
button on the player, and TOP MENU
button on the remote control unit.
Cancelled automatically 5 seconds later.
Press "FL Display" button on remote
control unit for next page (FL Display) on
values of laser drive current.
In STOP (no disc) mode, press STOP
button on the player, and " " button on
the remote control unit.
Cancelled automatically 5 seconds later.
While display Timer 1 data, press STOP
button on the player, and " " button on
the remote control unit.
Cancelled automatically 5 seconds later.
In STOP (no disc) mode, press STOP
button on the player, and " " button on
the remote control unit.
Cancelled automatically 5 seconds later.
While display Timer 2 data, press STOP
button on the player, and " " button on
the remote control unit.
Cancelled automatically 5 seconds later.