Panasonic SC-TM910DVD Service Manual page 26

Item
Mode Name Description
Micro- processor Micro-processor firmware version
firmware version display & EEPROM checksum
display & display.
EEPROM
checksum display.
DVD module DVD module firmware version
firmware version display is on the FL Display.
display "2" represents for GC/ GS
"3" represents for GCS/ GCT
Initialization Initialization.
User settings are cancelled and
player is initialized to factory
setting.
DVD Module To reset DVD Module.
Reset
DVD laser drive DVD laser drive current
current measurement.
measurement DVD laser drive current is
measured and the result is
displayed together with the initial
value stored in the EEPROM IC.
After the measurement, DVD laser
emission is kept on. It is turned off
when POWER key is switched off.
(It is also turned off when POWER
button on the player is switched
off.)
Communic- Displays the frequency of
ation error display communication errors between
system control IC and mechanism
control IC.
FL Display
1. For DVD laser drive current mode
2. The measurment value (In decimal
notation)
The value denotes the current in decimal
notation.
The above example shows the initial current
is 20mA and the measured value is 20mA.
26
manual de servicio SC-TM910DVD
Key Operation
Remote Control Key
In STOP (no disc) mode, press STOP
button on the player, and "7" button on the
remote control unit.
Cancelled automatically 5 seconds later.
Press "FL Display" button on remote
control unit for next page. (FL Display)
Refer to Section 10.3.1 for
information.
In STOP (no disc) mode, press STOP
button on the player, and "8" button on the
remote control unit.
Cancelled automatically 5 seconds later.
In STOP (no disc) mode, press STOP
button on the player, and
on the remote control unit.
In initialisation mode, press and hold STOP
button on the player followed by "Enter"
button on the remote control.
Cancelled automatically 5 seconds later.
In STOP (no disc) mode, press STOP
button on the player, and FUNCTIONS
button on the remote control unit.
Cancelled automatically 5 seconds later.
Press "FL Display" button on remote
control unit for next page (FL Display) on
values of DVD drive current.
In STOP (no disc) mode, press STOP
button on the player, and "MENU" button
on the remote control unit.
Cancelled automatically 5 seconds later.
more
button