Operation; Control Panel - Zanussi ZFC627WAP User Manual

Hide thumbs Also See for ZFC627WAP:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 35
Environment Protection
This appliance does not contain gasses which
could damage the ozone layer, in either its refrig-
erant circuit or insulation materials. The appliance shall
not be discarded together with the urban refuse and

Operation

Switching on
Insert the plug into the wall socket.
The Pilot light will light up.
Turn the Temperature regulator clockwise.
Important! If the temperature inside the appliance is too
high the Alarm light will light up.
Switching off
To turn off the appliance, turn the Temperature regulator
to the OFF position.
Temperature regulation
The temperature is automatically regulated.
To operate the appliance, proceed as follows:
• turn the Temperature regulator towards
the minimum coldness.
• turn the Temperature regulator towards
the maximum coldness.

Control panel

5
1
Pilot light
2
High temperature alarm light
3
Fast Freezing light
4
Fast Freezing switch
Downloaded from Fridge-Manual.com Manuals
to obtain
to obtain
1
2
3
4
rubbish. The insulation foam contains flammable gases:
the appliance shall be disposed according to the appli-
cable regulations to obtain from your local authorities.
Avoid damaging the cooling unit, especially at the rear
near the heat exchanger. The materials used on this ap-
pliance marked by the symbol
A medium setting is generally the most suitable.
However, the exact setting should be chosen keeping in
mind that the temperature inside the appliance depends
on:
• room temperature
• how often the lid is opened
• the quantity of food stored
• the location of the appliance.
5
Temperature regulator
Fast Freezing function
You can activate the Fast Freezing function by pressing
the Fast Freezing switch.
The Fast Freezing light will light up.
It is possible to deactivate the function at any time by
pressing the Fast Freezing switch. The Fast Freezing
light will switch off.
High temperature alarm
An increase in the temperature in the freezer (for exam-
ple due to an power failure) is indicated by switching on
of the Alarm light
During the alarm phase, don't place food inside the
freezer.
When normal conditions are restored the Alarm light
will switch off automatically.
are recyclable.
37

Advertisement

Table of Contents
loading

Table of Contents