or damaged power plug may overheat and cause • Do not use sharp objects to remove frost from the ap- a fire. pliance. Use a plastic scraper. 3. Make sure that you can come to the mains plug of Installation the appliance.
Operation Switching on A medium setting is generally the most suitable. Insert the plug into the wall socket. Turn the Temperature regulator clockwise. The Pilot light will light up. The Alarm light will light up. Switching off To turn off the appliance, turn the Temperature regulator to the OFF position.
Daily use Freezing fresh food Wait a few minutes before reopening the appliance. The vacuum valve will help you to open the lid. The freezer compartment is suitable for freezing fresh food and storing frozen and deep-frozen food for a long time. Warning! Never pull the handle with immense force.
Helpful hints and tips Hints for freezing • water ices, if consumed immediately after removal from the freezer compartment, can possibly cause the skin To help you make the most of the freezing process, here to be freeze burnt; are some important hints: •...
6. Set the temperature regulator to obtain the maximum 1. Switch off the appliance. coldness and run the appliance for two or three hours 2. Disconnect the mains plug from the mains socket. using this setting. 3. Remove all food. 7.
Problem Possible cause Solution There is too much frost and ice Products are not wrapped properly Wrap the products better The lid is not shut properly or do not Check if the lid closes well and the gas- close tightly kets are undamaged and clean The temperature is not set correctly.
2. Connect the wire coloured blue to the terminal either marked with the letter “N“ or coloured black. 3. Connect the wire coloured brown to the terminal ei- ther marked with the “L“ or coloured red. 4. Check that no cut, or stray strands of wire is present and the cord clamp is secure over the outer sheath.
To buy accessories, consumables and spare parts at our online shop please visit: www.zanussi.co.uk www.zanussi.com...