Slide the backplane towards the rear of the server, and then lift and remove the backplane.
c.
—
Two-bay power supply backplane
—
Four-bay power supply backplane
To replace the component, reverse the removal procedure.
Systems Insight Display assembly
The HPE Systems Insight Display (SID) is available as an option only for rack configurations.
CAUTION: When routing cables, always be sure that the cables are not in a position where
they can be pinched or crimped.
To remove the component:
Remove the security bezel
1.
("Remove the security bezel
(optional)" on page 28).
Removal and replacement procedures 41