Bluetooth Settings For Phoenix - Nokia n80 User Manual

Nokia Customer Care
Bluetooth component layout

Bluetooth settings for Phoenix

Steps
Phoenix service software.
1. Start
2. From the File menu, choose Open Product, and then choose the correct type designator from the
Product list.
3. Place the phone to a flash adapter in the local mode.
4. Choose Testing→Bluetooth LOCALS .
5. Locate JBT-9's serial number (12 digits) found in the type label on the back of JBT-9.
In addition to JBT-9, also JBT-3 and JBT-6 Bluetooth test boxes can be used.
Bluetooth LOCALS window, write the 12-digit serial number on the
6. In the
Counterpart BT Device Address line.
This needs to be done only once provided that JBT-9 is not changed.
7. Place the JBT-9 box near (within 10 cm) the BT antenna and click Run BER Test.
Results
Bit Error Rate test result is displayed in the
Page 6 –52
Bit Error Rate (BER) Tests pane in the Bluetooth LOCALS window.
COMPANY CONFIDENTIAL
Copyright © 2006 Nokia. All rights reserved.
BB Troubleshooting and Manual Tuning Guide
RM-91; RM-92
Issue 1