Nokia n80 User Manual page 112

Nokia Customer Care
Page 4 –8
FS-13
Flash adapter FS-13 is used for phone testing and flashing. FS-13 is
used with the generic flash adapter base SS-60/62 and control unit
CU-4 or interface adapter SS-46.
When flashing or system testing the phone, the adapter is attached to
replace the phone own battery.
All functions (as well as the calibration voltages, current and the
protections for over voltages, over current and voltage polarity), are
performed by CU-4.
Flash adapter FS-13 main features:
• VBATT supply interface
• USB / FBUS multiplexed interface to the phone
• Supply voltage for light source
MJ-66
MJ-66 is meant for component level troubleshooting.
The jig includes an RF interface for GSM, WCDMA, Bluetooth and NCW
(WLAN). In addition, it has the following features:
• Provides mechanical interface with the engine module
• Provides galvanic connection to test pads
• Multiplexing between USB and FBUS media, controlled by Vusb
• UI test interface
• MMC interface
• Audio components: IHF, MIC, earpiece
• Connector for control unit
• Access for system connector
Note: In the picture, two RF probes are shown. These are not
part of the MJ-66 sales package and must be ordered
separately.
•
GSM850
GSM900
GSM1800
GSM1900
WCDMA1900
WCDMA2100
COMPANY CONFIDENTIAL
Copyright © 2006 Nokia. All rights reserved.
Service Tools and Service Concepts
Flash adapter
Module jig
Table 7 Attenuation values
Band
0.25
0.25
0.4
0.45
0.45
0.5
RM-91; RM-92
Attenuation
Issue 1