Nomenclature - Olympus DP12 Instructions Manual

NOMENCLATURE

Any equipment connected to the camera unit should be an Olympus-specified product or a product
Camera Unit
in compliance with the requirements of IEC60950 or CISPR22/24. If equipment other than these
products is connected, Olympus cannot guarantee proper performance of the camera system.
Threaded C-mount (P. 8)
Control Box
AE LOCK indicator LED (P. 18)
LCD panel (P. 6)
SPOT metering
button (P. 17)
(Both REC modes)
PRINT reservation
button (P. 19)
(PLAY mode)
AE LOCK (Auto Exposure
Lock) button (P. 18)
(REC AUTO mode)
PROTECT button (P. 16)
(PLAY mode)
EXPOSE button (P. 13)
(Both REC modes)
OTWB (One-Touch White
Balance) button (P. 14)
(Both REC modes)
INFO (Information)
button (P. 18)
(PLAY mode)
4
(Left) MOVEbutton
(Down) MOVE button
(Right) MOVE button
(Up) MOVE button
Control box connector (P. 9)
Tripod adapter mount screw hole
LCD monitor (Next page)
CARD access indicator
LED (P.11)
ERASE button (P. 16)
MODE button (P. 13)
MENU button (P. 20)
Card cover (P.11)
(SmartMedia slot)
Main switch (P. 13)
SET/OK button