Displaying The Metering Range ..................... 25 12 Setting The Color Picture Display; Setting The Picture Display Orientation ...... 25 14 Setting The Scale Display - Olympus DP12 Instructions Manual

11
Displaying the Metering Range
}This item sets whether or not the metering area in the spot
and center-weighted average modes is to be displayed on
the LCD monitor.
12
Setting the Color Picture Display
}This item sets whether a color picture or monochrome picture
is displayed.
The monochrome option is applied to the recorded pictures
as well as to the live images.
13
Setting the Picture Display Orientation
}This item sets whether the picture displayed in the LCD monitor
is erect or inverted.
Only erect images are available with an external
NOTE
monitor.
14
Setting the Scale Display
}The scale of the specimen image according to the microscope
magnification can be displayed only in the live image or also in
the recorded pictures.
· Necessary scales can be stored under ON1 to ON3.
· The memory of ON1 to ON3 can stored the scale display
position, magnification, memory data No., etc.
When SETUP is selected and the SET/OK button is pressed, the
menu showing the items on the next page will be displayed.
DP12
Factory setup: OFF
Factory setup: COLOR
Monochrome
Color
Factory setup: R (Erect)
Up/down
inverted
display
Erect display
Factory setup: OFF
Detailed
setup
OFF
ON1
ON2
ON3
TMP (temporary)
25