Error Code List - Olympus DP12 Instructions Manual

ERROR CODE LIST

}The DP12 displays warnings in the form of error codes. (The display in the LCD panel of the control box blinks during
display.)
LCD Monitor
LCD Panel
(PLAY mode only)
CARD ERROR
NO CARD
UNFORMATTED CARD
WRITE-PROTECT
NO PICTURE
(No display)
CARD FULL
(No display)
BAD PICTURE
CANNOT OPEN FILE
(No display)
Error Details
The card cover is open.
Data in the SmartMedia cannot
be recorded, played or erased.
There is no SmartMedia in-
stalled in the camera system.
The SmartMedia needs to be
formatted.
A write protect seal is attached
to the SmartMedia or it is for
playback only.
There are no pictures recorded
in the SmartMedia. The camera
system cannot play it.
No more pictures can be re-
corded because the number of
remaining pictures is 0.
The SmartMedia does not have
available capacity any more.
It is extremely hot inside the
camera.
Error in playing the selected pic-
ture. Operations other than pic-
ture playback are possible.
The picture cannot be opened
with the DP12.
The DP12 may be malfunction-
ing.
Treatment
Insert a SmartMedia and close the card cover.
If the SmartMedia is dirty, wipe with cleaning
paper before insertion or format it. If this error
occurs again, the SmartMedia is not usable.
Insert a SmartMedia.
Format the SmartMedia.
Check the pictures to see if the write protect
seal is really necessary.
Insert a SmartMedia containing recorded pic-
tures.
Use another SmartMedia, erase unwanted pic-
tures or download existing data to your PC then
erase all pictures in the SmartMedia.
Use another card or download existing data to
your PC then erase all pictures in the
SmartMedia.
Turn off the camera system and leave it for a
while before turning it on again.
If the SmartMedia is dirty, wipe with cleaning
paper before insertion or format it. If this error
occurs again, the SmartMedia is not usable.
A picture recorded with a digital camera other
than the DP12 should be played on the digital
camera used in recording.
Unplug and plug the power cord of the AC
adapter.
If this error occurs again, the DP12 is malfunc-
tioning. Note the error number displayed be-
low the error code and consult your local
Olympus representative.
DP12
37