Using The Bottle Warmer To Warm Baby Food; Defrost Setting - Philips AVENT SCF355 Manual

7 Always check the temperature before you feed your baby.
Gently shake the bottle or milk storage container and check the
temperature of the milk by sprinkling a few drops on the inside of
your wrist (Fig. 9).
8 Turn the knob back to the 'off' position (Fig. 10).
Caution: If you do not turn the knob back to the 'off' position,
the water keeps warming.

Using the bottle warmer to warm baby food

1 Follow the same steps as indicated in the previous paragraph.
2 Make sure to stir the baby food during warming as it does not
circulate automatically. Be careful not to burn your fingers when
holding the container/jar while stirring. (Fig. 11)
After warming test the baby food with a spoon to ensure it is not too
hot. If the baby food is not warm enough, put the container back into the
bottle warmer and warm the baby food until it has the desired
temperature.
Note: Due to the high variety of baby food consistencies, it is strongly
recommended to continuously stir and check while you are warming the baby
food for an optimal result.

Defrost setting

At this setting, your frozen milk can be defrosted till liquid state.
Check the warming reference table for the expected defrost timings,
as indication one small and one larger milk volume are included in the
table. When your milk is defrosted, choose one of the warming settings.
Consider the start temperature of your milk around room temperature
for the warming timings as rough guideline.
Note: Due to the high variety of baby food consistencies, it is strongly
recommended to continuously stir and check while you are defrosting the
baby food for an optimal result.
ENGLISH
11