Vulcan-Hart VC5GD Service Manual page 16

FULL SIZE GAS CONVECTION OVEN - REMOVAL AND REPLACEMENT OF PARTS
Fig. 35
3. Loosen tab screw holding fan to component
panel.
4. Rotate tab so that fan will clear and remove fan.
5. Reverse procedure to install fan and check for
proper operation.
NOTE: Fan must be installed so air is pulled from
outside the rear of oven and blown into control area.
The arrow on the fan body indicates "air flow" direction
and should be pointing toward controls.
F45598 (0616) Page 16 of 35