Playing Discs - Sony DVP-S525D Operating Instructions Manual

Playing Discs

This chapter describes how to play a
DVD/CD/VIDEO CD.
This player conforms to the PAL color system.
When you play a disc recorded in the NTSC
color system, the player outputs the video
signal or the setup display etc. in the NTSC
color system and the picture may not appear
on the TV screen. In this case, open the disc
tray and remove the disc.
Downloaded From DvDPlayer-Manual.com Sherwood Manuals
Playing Discs
Depending on the DVD or VIDEO CD, some
operations may be different or restricted. Refer to the
instructions supplied with your disc.
1/u (POWER)
Connect headphones.
Adjust the headphone volume.
1
Make settings on your TV.
Turn on the TV and select the video input so that you
can view the pictures from this player.
When using a receiver (amplifier)
Turn on the receiver (amplifier) and select the
appropriate position so that you can listen to the
sound from this player.
2
Press 1/u (POWER) to turn on the player.
The indicator (red) above the 1/u (POWER) button
changes to green and the front panel display lights up.
3
Press §, and place the disc on the disc tray.
With the playback
side facing down
4
Press ·.
The disc tray closes, and the player starts playback
(Continuous Play). Adjust the volume on the TV or
the receiver (amplifier).
After following Step 4
pWhen playing a DVD
A DVD menu or title menu may appear on the TV
screen (see page 19).
pWhen playing a VIDEO CD
The menu screen may appear on the TV screen
depending on the VIDEO CD. You can play the disc
interactively, following the instructions on the menu
screen. (PBC Playback, see page 20.)
§ ·
15