Sony DVP-S525D Operating Instructions Manual page 11

If you have a digital component such as a
receiver (amplifier) with a digital connector, DAT
or MD
Connect the component via the DIGITAL OUT OPTICAL or
COAXIAL connector using an optical or coaxial digital
connecting cord (not supplied).
When you play a DVD, set "DIGIT AL OUT" in "AUDIO SETUP"
to "ON" and then set "DOLBY DIGIT AL" to "D-PCM," "MPEG"
to "PCM" and "DTS" to "OFF" in the setup display (page 49).
p When using an optical digital connecting cord
Optical digital connecting cord
(not supplied)
Take off the cap and plug in the optical digital connecting cord.
CD/DVD player
DIGITAL OUT
OPTICAL COAXIAL
PCM/DTS/MPEG
DOLBY DIGITAL (AC-3)
p When using a coaxial digital connecting cord
Coaxial digital connecting cord
(not supplied)
CD/DVD player
DIGITAL OUT
OPTICAL COAXIAL
PCM/DTS/MPEG
DOLBY DIGITAL (AC-3)
Notes
• Refer to the instructions supplied with the component to be
connected.
• You cannot make digital audio recordings of discs recorded in
multi-channel surround format directly using an MD deck or
DAT deck.
When you make the connections above, do not set
"DOLBY DIGIT AL" to "DOLBY DIGIT AL," "MPEG" to "MPEG"
and "DTS" to "ON." If you do, a loud noise will suddenly
come out fr o m the speakers, af fecting your ears or causing
the speakers to be damaged.
Downloaded From DvDPlayer-Manual.com Sherwood Manuals
Receiver (Amplifier)
with a digital
connector, MD deck,
DAT deck, etc.
DIGITAL IN
OPTICAL
Receiver (Amplifier)
with a digital
connector, MD deck,
DAT deck, etc.
DIGITAL IN
COAXIAL
If you have an audio component with a built-in
DTS decoder, Dolby Digital decoder or MPEG
decoder
Connect the component via the DIGITAL OUT OPTICAL or
COAXIAL connector using an optical or coaxial digital
connecting cord (not supplied).
p When you play a DVD that is recorded in DTS format
Set "DIGITAL OUT" in "AUDIO SETUP" to "ON" and then
set "DTS" to "ON" in the setup display (page 49).
p When you play a DVD that is recorded in Dolby Digital
format
Set "DIGITAL OUT" in "AUDIO SETUP" to "ON" and then
set "DOLBY DIGIT AL" to "DOLBY DIGIT AL" in the setup
display (page 49).
p When you play a DVD that is recorded in MPEG format
Set "DIGITAL OUT" in "AUDIO SETUP" to "ON" and then
set "MPEG" to "MPEG" in the setup display (page 49).
CD/DVD player
Optical or coaxial digital
connecting cord
Audio component
with a built in
DTS decoder,
DOLBY DIGITAL
decoder or MPEG
decoder
Notes
• Refer to the instructions supplied with the component to be
connected.
• When you do not connect an audio component with a
built-in DTS decoder , do not set "DTS" to "ON."
• When you do not connect an audio component with a
built-in DOLBY DIGIT AL decoder , do not set "DOLBY
DIGIT AL" to "DOLBY DIGIT AL."
• When you do not connect an audio component with a built
in MPEG decoder , do not set "MPEG" to "MPEG."
Setups for the player
Some setups are necessary for the player depending on
the components to be connected.
Use the setup display to change the various settings.
For details on using the setup display, see page 41.
• To listen to the sound thr ough speakers connected
to a r eceiver (amplifier) having a digital connector or
to output the sound to a digital component such as
a DAT or MD deck
When you play a DVD, set "DIGITAL OUT" in
"AUDIO SETUP" to "ON" and then set "DOLBY
DIGITAL" to "D-PCM," "MPEG" to "PCM" and "DTS"
to "OFF" in the setup display (page 49). These are the
default settings.
Speakers
11