Advertisement
ENGLISH
Introduction
Thank you for purchasing the Peavey® RBN™112 powered speaker system. The RBN™112 features a bi-amped
power section that provides 1000 watts of peak power for the woofer and 500 watts of peak power for the rib-
bon driver tweeter, both with DDT™ compression. Featuring a 12" Neo dual voice coil Scorpion® woofer and
the RD™2.6 true ribbon driver, the RBN™112 provides two independent mixed input channels, each with Gain
control and a mic/line gain switch, and each channel features a combo jack with 1/4" TRS & female XLR and a
balanced input with volume control. A DSP based crossover and processor provides extreme flexibility to the
user faced with common location acoustics conditions.
Features
* Bi-amplified powered speaker system
* 1000 watts peak available woofer power, 500 watts peak available tweeter power
* Both power amps have DDT compression
* 12" Neodymium Dual Voice Coil Scorpion® woofer
* Peavey RD™ 2.6 ribbon driver tweeter on a low-coloration waveguide
* Peak SPL up to 130 dB with music!
* DSP based crossover, limiting and EQ
* EQ presets available via rotary encoder pushbutton select
* 9-band EQ and other system settings accessed via rotary encoder pushbutton select
* Dynamic bass boost function
* Up to 150 mS of architectural delay
* Fan cooled for maximum reliability
* Two independent mixed input channels, with Gain control and mic/line gain switch
* Each channel features a combo jack with 1/4" TRS & female XLR balanced input
* Input 2 has a 3.5 mm (1/8") stereo media input jack
* Output connectors are male XLR
* One full handle on the right side, full handle on top rear
* Full length perforated steel grille with cloth backing
* Rugged polypropylene molded enclosure
* Pole mount built-in
* Reduced weight – Only 39 pounds!
* Flying point insert groups on top and bottom mate with VM™ 70 mounting bracket
Description
The Peavey® RBN™112 is a powered, bi-amplified, two-way speaker system engineered to provide very high
levels of performance in a compact powered loudspeaker. This two-way powered system is comprised of a 1000
W peak switching power amplifier driving a 12" Neodymium magnet based dual voice coil Scorpion® woofer.
The RD™2.6 true ribbon tweeter is driven by a 500 W peak switching power amplifier, and is coupled to a low
coloration waveguide with a coverage pattern of 110° horizontal by 30° vertical.
The RBN™112 is capable of up to 130 dB peak SPL. The enclosure utilizes tough high-performance plastic in an
injection-molded modified-trapezoidal form, with a full-length coated perforated steel grille to offer an attrac-
tive yet durable powered speaker system. The cabinet and grille are black.
Advertisement
