Advertisement
If Other Subwoofer
Connect Mixer to
RBN112 Input
Connect 112 Proc
Out to Sub Input
When the PVXp or "Other" sub is selected, the program EQ (presets), GEQ and delay screens function normal-
ly. The Processed output sends a subwoofer signal out the processed output. The Hi-pass filter on the RBN™112
woofer is raised to cross-over with the subwoofer processed output at the selected frequency.
RBN 112 Location: (configuration submenu)
This affects some of the dedicated processing of the woofer to account for boundary surfaces etc.
Pole Mount (Default Selection)
Flown
Floor Monitor
Program EQ: Displays current EQ selection (EDM preset is the default on 1st time power up)
(Presets)
The program EQ selection is applied to the Graphic Equalizer and Bass enhancer.
The last preset used, including a Custom one, is what will load the next time the RBN™112 is powered up.
Note: If input source is from the RBN Sub High-Pass Processed output, then the screen will display:
Bass enhancement:
Delay:
Graphic EQ: Current settings 9 Bands +/- 12 dB at ISO octave centers (63Hz to 16 kHz)
Press the encoder to enter the screen to adjust the GEQ. Turning the encoder selects the frequency band to be
adjusted. Press the encoder to adjust that band. Pressing the encoder again returns to the band select mode. To
exit to the main menu, turn the encoder past the 16 kHz band to the X and Exit will appear. Press the encoder to
exit.
EDM, Voice, Rock, DJ .......
"Custom" is displayed if GEQ has been adjusted by the user.
"EQ Bypassed"
"Use EQ in RBN Sub"
Off or On.
Current delay time
Adjust screen 0 to 150 msec also Feet and Meters
Note: In RBN™112 if input source is RBN Sub, then Display:
"Delay Bypassed"
"Set DLY in Sub"
Note: In RBN™112 if input source is RBN Sub, then Display:
"EQ Bypassed"
"Use EQ in RBN Sub"
Advertisement
