Advertisement
SPECIFICATIONS
Frequency response: 59 Hz to 20 kHz
Low frequency limit (-3 dB point): 59 Hz
Usable low frequency limit (-10 dB point): 52 Hz
Internal power amplifiers (@120 VAC line):
Woofer - 1000 watts peak available power
Continuous Power: 500 watts @ less than 1% distortion
Tweeter - 500 watts peak available power
Continuous Power: 250 watts @ less than 1% distortion.
Nominal sensitivity (1W @1M, swept
sine input in anechoic environment): 99 dB (average)
Maximum sound pressure level: 130 dB music peak
Nominal radiation angles: 110° horizontal by 30° vertical
Transducer complement: 12" Neodymium Dual Voice Coil Scorpion® woofer, Model SDC1288, and an RD™2.6
with 4.75" long aluminum composite ribbon tweeter
Box tuning frequency (Fbox): 60 Hz
Electroacoustic crossover frequency: 2,000 Hz
Crossover Slopes: 24 dB/octave (fourth order) low pass, 24dB/octave (fourth order) high pass, and driver EQ.
Input Connections: Two combo female XLR/ 1/4" phone jack providing balanced or unbalanced operation, and
one 3.5 mm stereo media jack.
Output Connections: Two XLR Outputs, one Full Range Thru, electrically buffered with selectable option of
Channel A input only, or Ch. A and Ch. B mixed. The other XLR output is a High–Pass Output
Controls: Ch. 1 and Ch. 1 Gain control knob. Ch. 1 and Ch. 2 Mic/Line gain select pushbutton
Status Indicators: Blue Illuminated ribbon lens indicates power On, illumination can be turned Off by user.
Front baffle red LED indicates DDT activation.
Rear panel LCD screen in Input Level mode, shows DDT activation by flashing "DDT" on the LCD screen, right
hand side. Signal level indicated by bar graph coming from left hand side of LCD.
Electronic Crossover: DSP based, with LCD display and Rotary Encoder Knob for selection of EQ presets and
Graphic EQ. Crossover Frequency Set to 2.0 kHz. Low Pass slope: 24 dB/octave, High Pass slope: 24 dB/octave
DSP Section Specifications:
Latency: Approx. 2.7 msec
ADC and DAC Sampling frequency: 96 kHz
Advertisement
