Video Input; Video System Selection - Christie lhd700 User Manual

1 Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select Input
and then press the Point ► or the SELECT button.
2
Use the Point ▲▼ buttons to select System and then
press the Point ► or the SELECT button.
3
Use the Point ▲▼ buttons to select the desired
system and then press the SELECT button.
Video jack or S-video jack
Auto
The projector automatically detects an incoming video
system, and adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select the
system manually.
PAL/SECAM/NTSC/NTSC4 .43/PAL-M/PAL-N
If the projector cannot reproduce proper video image,
select a specific broadcast signal format from among
PAL, SECAM, NTSC, NTSC 4 .43, PAL-M, and PAL-N.
y, Pb/Cb, Pr/Cr jacks
Auto
The projector automatically detects an incoming video
signal, and adjusts itself to optimize its performance.
When the Video System is 1035i, 1080i or 1080p,
select the system manually.
y, Pb/Cb, Pr/Cr SIGNAL FORMAT
If the projector cannot reproduce proper video image,
select a specific component video signal format from
among 480i, 575i, 480p, 575p, 720p, 1035i, 1080i,
and 1080p.
Note:
The AV System Menu cannot be selected when
selecting RGB (Scart).
46
Downloaded From projector-manual.com Christie Manuals

Video Input

Video System Selection

AV System Menu (Video or S-video)
AV System Menu (y, Pb/Cb, Pr/Cr)
020-000422-01 Rev.1 (11-2011)
LHD700 User Manual