Side Control And Indicators - Christie lhd700 User Manual

Part Names and Functions
Side Control
①
②
③
④
⑤
① ON/STAND-By button
Turn the projector on or off (pp.23–24).
② INPUT button
Select an input source (pp.32–34).
③ MENU button
Open or close the On-Screen Menu (p.25).
④ Point ▲▼◄► buttons
– Select an item or adjust the value in the
On-Screen Menu (p.25).
– Pan the image in Digital zoom + mode (p.44).
⑤ SHUTTER button
Close and open up the built-in shutter. (p. 27 )
⑥ SELECT button
– Execute the selected item (p.25).
– Expand or compress the image in the Digital
zoom mode (p.44).
⑦ LENS button
Enter the focus, zoom, and lens shift adjustment
mode (p.27).
12
Downloaded From projector-manual.com Christie Manuals

Side Control and Indicators

⑦
⑥
Indicators (on the top panel)
⑧ POWER indicator
– Light when in stand-by mode and during
operations.
– Blink in the Power management mode (p.63).
⑨ LAMP/ SHUTTER indicator
Light red during operations.
Light blue when the shutter is closed (p. 85 ).
⑩ LAMP REPLACE indicator
Light orange when the projection lamp reaches
its end of life (pp.74, 84).
⑪ WARNING FILTER indicator
– Blink slow when the filter is being scrolled (pp.
71, 85).
– Blink fast when the filter scroll is not working
properly or the filter cartridge is not installed
(pp.71, 87).
– Light orange when the clogging of the filter is
detected or the filter counter reaches a time
set in the timer setting, urging immediate filter/
filter cartridge replacement (pp.70, 71, 87).
⑫ WARNING TEMP . indicator
Blink red when the internal temperature of the
projector exceeds the operating range (pp.77,
85-87).
⑧
⑨
⑩
⑪
⑫
LHD700 User Manual
020-000422-01 Rev.1 (11-2011)