Elite Screens VMAX Tab-Tension Dual Series User Manual

Advertisement

Tab-tensioned Dual Format Electric Projection Screen
VMAX Tab-Tension Dual Series
Important Safety & Warning Precautions
Make sure to read this user's guide and follow the procedure below.
Caution: The Screen's Black Top Drop is already set to its maximum drop distance. There is NO extra top Black
Drop in the roller. Please be aware of this. Any attempts to increase the top black drop will void your warranty
with Elite Screens. Unapproved changes or modifications (except for cutting the power cord for hardwire
installations) to this unit are prohibited and will void your warranty. For more information, please contact our
Technical Support Department at (877) 511-1211 Ext. 604.
Please retain this user's guide for future reference.
To avoid damaging the unit, do not use with any unauthorized accessories not recommended by the
manufacturer.
Handle the unit carefully during transportation to avoid any damages.
To ensure safe and reliable operation, direct connection to a properly grounded power source is
advised.
The power outlet supplying power to the unit should be close to the unit and easily accessible.
Do not install the unit on uneven or inclined surfaces.
Do not place any heavy objects over the power cord.
Position the power cord properly to avoid creating a trip obstacle.
To avoid an electrical shock or fire due to a loose contact or short circuit, do not overload the power
cord.
The internal & external parts of this unit are not end user serviceable. Do not attempt to disassemble
this unit by yourself. No one except authorized technicians can open and make repairs to this unit.
Make sure the power source that this unit is connected to has a continuous power flow.
If there is need to use an extension cord, make sure the cord has an equal rating as the appliance to
avoid over heat.
Do not handle the power plug when your hands are wet or your feet are in contact with water.
Do not use this unit under the following circumstances:
Disconnect the power cord under the conditions of heavy rain, wind thunder or lightning.
Avoid direct sun light, rain shower and moisture.
Keep away from fire sources and high temperature to prevent this device from overheating.
Cut off the power supply first before transportation or maintenance.
To avoid possible injury and/or an electric shock, do not attempt to use this screen if there is obvious
damage or if there are any evident broken parts.
Rev.062215-EA
User's Guide
1
www.elitescreens.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VMAX Tab-Tension Dual Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Elite Screens VMAX Tab-Tension Dual Series

  • Page 1 Drop in the roller. Please be aware of this. Any attempts to increase the top black drop will void your warranty with Elite Screens. Unapproved changes or modifications (except for cutting the power cord for hardwire installations) to this unit are prohibited and will void your warranty. For more information, please contact our Technical Support Department at (877) 511-1211 Ext.
  • Page 2 The installer must insure that proper mounting hardware and fasteners are used to provide adequate strength suitable for the installation. Elite Screens is not liable for any faulty installations. For vertical limit adjustment instructions, please contact our Technical Support Department at (877) 511-1211 Ext.
  • Page 3 Control System for VMAX Tab-Tension Dual Series The VMAX Tab-Tension Dual Series features the capability of alternating 16:9 HDTV and 2.35:1 Cinemascope projection screen formats, which are operated with the included Radio Frequency & Infrared Remote Controls or the 3-way Wall Switch. The dual motors and screen materials allow you to utilize both formats.
  • Page 4 C. M4 Screw Installation Instructions Elite Screens is not liable for any faulty installations. The VMAX Tab-Tension Dual Screen is designed for a wall or optional in-ceiling installation. Hardware for a wall installation is provided, please contact Elite Screens for information about our optional in-ceiling trim kit.
  • Page 5 5. Insert the top of the screen into the Mounting Bracket’s (B) slide channel and move to the desired position. Slide Channel Screen Case 6. Secure the screen case to the bracket with the M4 Screw (C). (C) M4 Screw For a local Elite Screens contact or Technical Support, please visit www.elitescreens.com Rev.062215-EA www.elitescreens.com...

Table of Contents