Fisher & Paykel ELBA OR61 Installation Instructions & User Manual page 30

Replacing the oven light bulb
Note: oven bulb replacement is not covered by your warranty.
1 Let the oven cavity and the grill element cool down.
2 Turn the power to the cooker off at the wall.
IMPORTANT!
Disconnect the cooker from the power supply before continuing.
3 Grip the front edge of the lamp cover and pull it away from the oven wall to remove.
IMPORTANT!
Never use screwdrivers or other utensils to remove the lamp cover, as doing so could
damage the surrounding enamel. Only use your hands.
4 Unscrew and replace the bulb with a new one suitable for high temperatures (300
with the following specifications: 220-240V, E14 and same wattage as the bulb being
replaced (check wattage stamped on bulb).
5 Refit the lamp cover, making sure it clicks into place.
IMPORTANT!
The notch in the inner edge of the cover must be on the side closer to the oven floor.
6 Turn the power to the cooker back on. If your model has an electronic clock, set the
clock.
28
CARE AND CLEANING
C)
o