1. Manuals
  2. Brands
  3. Tvone Manuals
  4. Switch
  5. 1T-MV-8474
  6. Instruction manual

Tvone 1T-MV-8474 Instruction Manual

4k multiviewer
Hide thumbs Also See for 1T-MV-8474:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual

Instruction Manual

1T-MV-8474
4K Multiviewer

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 1T-MV-8474 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Tvone 1T-MV-8474

Summary of Contents for Tvone 1T-MV-8474

  • Page 1: Instruction Manual

    Instruction Manual 1T-MV-8474 4K Multiviewer...

  • Page 3: Table Of Contents

    Table of Contents Liability Statement ................4 Safety Precautions ................5 Introduction ..................6 Key Benefits ..................7 Getting Started ................. 8 Front Panel ................... 8 Rear Panel ..................9 IR Remote Control Unit .............. 10 Package Contents ................11 Installation ..................11 How to Connect the Multiviewer ..........
  • Page 4 Advanced functions using the front panel........24 Releasing Front Panel Lock ............24 Factory Reset Button ..............24 Firmware Updates ..............24 External Controls ................26 Connection via RS232 ..............26 IP Connectivity ................27 WEB Connectivity................ 28 General ..................28 Input Select ................29 Aspect Ratio ................29 Audio Input ................29...
  • Page 5 Video OSD ................34 Front Panel Lock ..............34 EDID ....................35 EDID Copy ................35 EDID Upload ................36 EDID Download ..............36 Network ...................36 Networks ................36 Sockets ..................37 Others: ..................37 Electrical Parameters ..............38 Input Resolution ................ 40 Output Resolution ..............

  • Page 6: Liability Statement

    This statement does not affect the legal rights of the user in any way.

  • Page 7: Safety Precautions

    Safety Precautions Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment:  Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.

  • Page 8: Introduction

    The on board web interface gives access from your PC to system setup, Full EDID management and audio control including delay and volume adjustments, making it easy to integrate the 1T-MV-8474 into complex systems. Control is via a Web interface, RS232, Ethernet, Infrared remote or from the front panel buttons.

  • Page 9: Key Benefits

    Key Benefits  Multiple inputs: 4 x HDMI, 2 x DisplayPort, 1 x RGB/YPbPr.  HDMI, DisplayPort source input with 4Kx2K@30Hz support.  Supports MHL in the four HDMI input ports.  Supports multiple HDMI output resolutions, such as 4Kx2K@30Hz and 1080P.

  • Page 10: Getting Started

    Getting Started Front Panel Name Description Infrared sensor for use with the remote IR receiver window control. Buttons 1-7 to correspond with video or audio inputs. The indicators mean the Input Select corresponding status of the video or audio input. Press to select the Audio Input required.

  • Page 11: Rear Panel

    Rear Panel Name Description Power ON or OFF using this switch. Power Switch and Connect the AC power cord provided to an 110/220 AC Power available electrical outlet. Receptacle 8 channel analog audio output, Connect a 3.5mm Analog audio output stereo input to the Line In jack of a multimedia system.

  • Page 12: Ir Remote Control Unit

    IR Remote Control Unit Name Description Power Power the Multiviewer ON or OFF Input 1-7 Press "1-7" to select the corresponding video input or audio input Windows A-D A-D represents the 4 possible windows. Pressing one will show which designated Input is selected, and the others will flash.

  • Page 13: Package Contents

    Package Contents  1T-MV-8474 4K Multiviewer  19 Button remote control  AC Power cord  2x Rack ears  Instruction Manual Installation How to Connect the Multiviewer Connect up to four 4K or HD HDMI sources to the input ports...

  • Page 14: Wiring Diagram

    Wiring Diagram Operating Standby and Work Mode The Power LED on the front panel illuminates red to indicate the unit has power. If the indicator does not illuminate, check the power supply is attached correctly. When the unit is in standby mode, the indicator light will display as green. In normal working mode the indicator light turns off.

  • Page 15: Screen Layout Configuration

    Screen layout Configuration Multiviewer Switcher offers up to 16 window configurations through the web interface, with four of them available at any one time via the front panel or remote control. The default configuration consists of: single, double, triple or quadruple windows on buttons 1 through to 4. The 16 screen configurations consist of the following layouts (with numbers 1-4 being the factory defaults): Pressing one of the four options will display the Screen Layout, and the...

  • Page 16: Examples Of Configurations

    Multiviewer displays up to four sources. When multiple sources are displayed on the screen, each source is regarded as a single window, and each window is defined as an input. Examples of configurations This section demonstrates how a series of configurations are created. To assist with the description we will use the following example to illustrate a configuration.

  • Page 17: Single Window

    Single Window Select the Window Layout 1 button on the front panel or on the remote to set single window mode, Windows Select A button indicator lights up, Input Select 1 indicator lights up. HDMI output configures the HDMI 1 input, the window is shown as follows.

  • Page 18: Double Windows

    Double Windows Select the Window Layout 2 button on the front panel or on the remote to change the mode of double window. Video A and B button indicators on the front panel light up. Within the Input Select two buttons will light to denote the current selection. Press Windows Select A, the Inputs will flash.

  • Page 19: Triple Windows

    Triple Windows Select the Window Layout 3 button on the front panel or on the remote to set to triple windows mode, Windows Select A, B and C button indicators on the front panel light up. Press Windows Select A, the Inputs will flash. Select the required Input.

  • Page 20: Quadruple Windows

    Quadruple Windows Select the Windows Layout 4 button on the front panel or on the remote to set to quadruple windows mode, Windows Select A, B, C and D button indicators on the front panel light up. Press Windows Select A, the Inputs will flash. Select the required Input.

  • Page 21: Output Resolution

    Output Resolution HDMI output resolutions support multiple modes with the indicator indication.  Auto - Auto means that it outputs the HDMI resolutions based on the EDID information read from the display device.  4K * 2K （3840 * 2160 @30Hz） ...

  • Page 22: Audio Setting

    Audio Setting Audio Input Select When selecting the video input, you can assign one of seven external analog inputs as an alternative to the embedded digital stream on HDMI or DisplayPort. If the HDMI or DisplayPort input has no audio, it will automatically select the audio input from the corresponding 3.5 mm stereo input.
  • Page 23 Alternatively Press the required Input channel. The Audio and Window Select lights will blink. Press Audio, The input channel selected in step 1 is now the selected audio output channel. The Inputs indicator and audio indicator stop blinking. If no further operation is performed within 5 seconds, this status will be adopted.

  • Page 24: Audio Output Instructions

    Channel Audio Format Audio Output Instructions There are three methods of audio output:  HDMI output  Optical output (TOSLINK)  Analog output, 8 channels If the input audio format is only 2 channels (Stereo), it will use channels 1 & 2 of the analog outputs.

  • Page 25: Osd

    The On Screen Display (OSD) will only be displayed when it has been enabled in the WebGui. The displays are as follows: After the initial Boot sequence by default OSD is set to On. Note: this can be turned off via the WebGui. Each window OSD displays the input status and the source resolution of the incoming signal.

  • Page 26: Advanced Functions Using The Front Panel

    You’ll see all the front panel button LEDs blink to indicate the unit is being set to factory default. Firmware Updates 1T-MV-8474 can be updated through a USB drive as follows. Copy the updating file “MERGE.bin” to the root directory of the USB drive.
  • Page 27 Attention: Do not power-off until the upgrade process is completed, or the unit firmware will be corrupted. After updating, “Upgrading is successful, system will reboot” is displayed in the display device. After a few seconds, the unit will reboot. The unit reboots automatically. The upgrade process is now complete.

  • Page 28: External Controls

    Connection via RS232 RS-232 port: Connect to RXD, TXD, GND only RS-232 Settings: Description Setting Baud rate 9600 Data bits Parity None Stop bits Hardware flow control None Note: For more information about serial command lines, see the Separate 1T-MV-8474 API Document.

  • Page 29: Ip Connectivity

    IP Connectivity 1T-MV-8474 supports IP control, Telnet, UDP and TCPIP. The IP address and port number is displayed when the unit is powered on, or the screen layout is changed via the OSD when it is enabled. By factory default the OSD is...

  • Page 30: Web Connectivity

    WEB Connectivity 1T-MV-8474 can be controlled via a Web browser, which gives access to the unit’s internal settings. By default the unit will obtain an IP address using DHCP when it is connected to a valid network. Note Factory Default IP address is 10.0.0.10 In this example, the obtained IP address is 192.168.1.123 and port number is...

  • Page 31: Input Select

     Input Select  Aspect Ratio  Audio Input  Audio Input Configuration  Output Resolution  Windows Layout  Button Configuration Input Select Window A-D. Select the Video Input channel (1-7) for each of the required windows. Screen Layout Single = Window A; Double Window = A, B; Triple Window = A, B, C;...

  • Page 32: Audio Input Configuration

    Audio Input Configuration The Audio Input can be configured for Input 1-6 for either Auto or External. Note that Input 7 (VGA) has no automatic (embedded audio) and requires an external connection. Click on Submit to implement any changes. Output Resolution Select the HDMI output resolution selection: AUTO (auto adjustment of the output resolution based on the EDID of the display device), 4Kx2K@30Hz, 1920x1080@60Hz, 1280x720@60Hz, 1920x1200@60Hz, 1600x1200@60Hz,...

  • Page 33: Button Configuration

    Button Configuration A unique feature of the WebGUI, opposed to controlling the 1T-MV-8474 panel or remote, is that you can reassign the layouts selected by the four Screen Layout buttons. Instead of being limited to just the default single, double, triple or quadruple window layouts, you can assign any of the 16 layouts to a designated button.

  • Page 34: Advanced

    Advanced The Advanced tab contains the following options:  Power Switch  Power Saving (0-60min)  Audio Mute  Audio Delay (0~10)  Auto Position  Restore to default  Serial Baudrate  Audio OSD  Video OSD  Front Panel Lock (unlock admin complete) It also shows the Firmware and WebGUI version information.

  • Page 35: Power Saving

    Power Saving To save power, when no signal is input in all the windows, it enters the status of auto setting the standby time. Time options range from 0 min to 60 min. It's recommended that you use 0 min, 5 min, 10 min, 15 min, 30 min and 60 min.

  • Page 36: Restore To Default Setting

    Restore to default Setting Tick the checkbox and click on Submit to restore the unit to factory defaults. Note: Be aware that will reset the IP address of the unit, and you may need to obtain the new IP address before browsing to the WebGUI. Serial Baud Rate Setting Select a baud rate from 9600, 14400, 19200, 28800, 38400, 57600, 115200.

  • Page 37: Edid

    EDID Extended display identification data (EDID) is a data structure provided by a digital display to describe its capabilities to a video source (e.g. graphics card or set-top box). It is what enables a modern personal computer to know what kinds of monitors are connected to it. The EDID tab provides the option to copy, upload or download the EDID.

  • Page 38: Edid Upload

    EDID Upload If you have a specific EDID file that you want to load it can be imported on the Multiviewer from a local location by browsing to it. It needs to be in a *.bin format. When you have selected the file, select a custom location, there are a choice of 7, and click on Upload.

  • Page 39: Sockets

    Set IP, Mask, Gateway and DNS, then click on Submit to confirm. Note: that changes may mean that unit/laptop will be on different address ranges and you may need to modify the laptop address to connect back to the unit. Sockets Choose the required socket from TCP Server, TCP Client, or TCP Auto, UDP Mode or UDP Multicast and click Submit to confirm selection.

  • Page 40: Electrical Parameters

    Electrical Parameters Unit Functionality Video Input Formats HDMI, DVI, DisplayPort, RGBHV, YPrPb Audio Input Formats HDMI and DisplayPort: embedded digital external analog stereo audio: 20 kΩ impedance Video Output Formats HDMI Audio Output Formats HDMI: embedded digital audio 7.1 Surround analog audio: 20 kΩ...
  • Page 41 0º to +40º C (+32º to +104º F) Storage Temperature −20˚C to 60˚C (−4˚F~140˚F) Operating Humidity 20% to 90% Non-Condensing Product Item Number 1T-MV-8474 4K Multiviewer Accessories Included 19 Button remote control, AC power cord User Guide and 2x rack ears...

  • Page 42: Input Resolution

    Input Resolution Resolution HDMI DisplayPort 640x350 640x400 640x480 640x480 60/75/85 75/85 720x400 720x480 720x576 720x576 50/100 800x600 60/75/85 848x480 1024x768 60/75/85 60/70/75 1152x864 1280x720 50/60 50/60 1280x768 60/75/85 60/75/80 1280x960 60/85 1280x1024 60/75/85 60/75 1366x768 1600x900 1600x1024 1600x1200 60/65/70/75 1680x1050 1792x1344 1856x1392 1920x1080...

  • Page 43: Output Resolution

    Output Resolution HDMI Output Auto 3840x2160@30 1920x1080@60 1280x720@60 (4K) (1080p) (720p) 1920x1200@60 1600x1200@60 1280x800@60 1024x768@60 (WUXGA) (UXGA) (WXGA) (XGA)

  • Page 44: Limited Warranty

    Should a product, in tvONE’s opinion, prove defective within this warranty period, tvONE, at its discretion, will repair or replace this product without charge. Any defective parts replaced become the property of tvONE. This...

  • Page 45: Regulatory Compliance

    The liability of tvONE with respect to any defective products will be limited to the repair or replacement of such products. In no event shall tvONE be responsible or liable for any damage arising from the use of such defective products whether such damages be direct, indirect, consequential or otherwise, and whether such damages are incurred by the reseller, end-user or any third party.

  • Page 46: Contact Information

    Contact Information Should you have questions or require assistance with this product in areas not covered by this manual, please contact tvONE at the appropriate location shown below. tvONE Global Website: www.tvone.com Information: mailto:info@tvone.com tvONE NCSA North, Central and South America...
  • Page 47 tvONE.

Table of Contents