External controls The web interface Finding out the IP address of your 4K Multiviewer Opening the web interface • IP connections Network settings Network...
Page 13
Configuring your network address Note Configuring sockets • • RS-232 The RS-232 port...
Operation Starting up and shutting down the 4K Multiviewer • • • • Advanced Window layouts Overview of window layouts...
Page 18
The 16 window layouts Note: Choosing a window layout from your default options •...
Page 19
Choosing a window layout with the web interface General Submit Choosing your own default window layouts General Submit Tip:...
Page 20
Configuring your display Configuring displays...
Page 21
Example display configurations Key to example configurations...
Page 22
Example of a single window display Example of a double window display Note: • • Example of a triple window display • • •...
Page 23
Example of a quadruple window display • • • • Configuring window layouts in the web interface General Submit...
Page 24
Turning off a window to leave it blank Note: Advanced Changing the aspect ratio of a window General...
Page 25
• • • • Submit Automatically positioning VGA/RGB Advanced Note: Changing the resolution of your output General...
Page 26
Audio settings Connecting a backup analog audio input • Choosing to always use an analog audio source General • External • Auto Note:...
Page 27
Selecting an audio source General Audio Input Submit Audio Gain Settings Web GUI Volume Setting Input Output Gain (dB) [Tolerance ±3dB] HDMI In HDMI Out Line In HDMI Out HDMI In Line Out Line In Line Out...
Page 28
Syncing audio with audio delay Advanced Setting Delay in milliseconds • Audio Delay Submit • Audio Delay Submit...
Page 29
Locking the front panel • • To activate or deactivate the admin lock Advanced • Admin Front Panel Lock • Unlock • To activate or deactivate the complete lock Advanced • Complete Front Panel Lock • Unlock •...
Advanced operation Saving power with automatic shutdown Advanced • Power Saving Submit • Power Saving Submit Restoring the default factory settings Advanced...
Page 31
Restoring default network settings Network • Revert network setting to factory default settings Submit Note Changing the baud rate Switching the analog input between RGB and YPbPr Advanced...
Page 32
Turning auto-adjust on and off for VGA sources Auto Adjust Advanced Firmware Finding your firmware version Advanced Updating firmware Risk of damage to equipment: Note: www.tvone.com/firmware- updates MERGE.bin System is upgrading… Upgrading is successful, system will reboot.
Page 33
Copying, uploading and downloading EDID EDID What is EDID? Troubleshooting offset or distorted video...
Page 34
Copying an EDID to an input device • Submit Uploading a different EDID • • Select Custom Location • Upload Downloading and editing an EDID...
Need help?
Do you have a question about the 1T-MV-8474 and is the answer not in the manual?
Questions and answers