Door rack and
Downloaded from Fridge-Manual.com Manuals
How to dismantle parts
Dismantling is done in the reverse sequence of assembly.
Be sure to unplug the power plug before dismantling and assembly.
Never apply severe force to dismantle parts. Parts may be damaged.
Separate the lamp by pulling it out
Turn the bulb counterclockwise. Use a 40-watt bulb
(max.) which can be purchased at a service
Not all bulbs will t your refrigerator.
Be sure to replace the bulb will one of the same size, shape and wattage.
The dispenser lights are LEDs that can not be changed.
To remove the lamp cover, press the protrusion
then pull the lamp cover out.
Turn the bulb counterclockwise. Max. 40 W bulb for refrigerator is used and can be
purchased at a service center.
To remove a shelf, push the shelf to the left
lift the left part of the shelf a bit
, and take it out.
Lift the door rack holding both sides
pull it out
Separate the bin (
) to upward.
Separate the upper rack of the refreshment
center and then pull out the refreshment
center cover ( ).
The refreshment center can be removed
by pulling it upwards.
Be sure to remove parts from the refrigerator door when removing the vegetable
compartment, snack drawer and refreshment center cover.
Care and maintenance
the lamp cover.
under the lamp cover to the front and
, lift the right