Downloaded from Fridge-Manual.com Manuals
Keep ventilation openings, in the appliance enclosure or in the built-in structure,
clear of obstruction.
Do not use mechanical devices or other means to accelerate the defrosting process,
other than those recommended by the manufacturer.
Do not damage the refrigerant circuit.
Do not use electrical appliances inside the food storage compartments of the
appliance, unless they are of the type recommended by the manufacturer.
The refrigerant and insulation blowing gas used in the appliance require special
disposal procedures. When disposal, please consult with service agent or a similarly
quali ed person.
This appliance contains a small amount of isobutane refrigerant (R600a),
natural gas with high environmental compatibility, but it is also combustible.
When transporting and installing the appliance, care should be taken to ensure
that no parts of the refrigerating circuit are damaged. Refrigerant squirting out
of the pipes could ignite or cause an eye injury. If a leak is detected, avoid any
naked ames or potential sources of ignition and air the room in which the
appliance is standing for several minutes.
In order to avoid the creation of a ammable gas air mixture if a leak in the
refrigerating circuit occurs, the size of the room in which the appliance may be sited
depends on the amount of refrigerant used. The room must be 1m
8g of R600a refrigerant inside the appliance. The amount of refrigerant in your
particular appliance is shown on the identi cation plate inside the appliance. Never
start up an appliance showing any signs of damage. If in doubt, consult your dealer.
in size for every