Before setting up a projector, install Projection Lens on
Projector.
1. Before installation, check where a projector is used and
prepare a suitable lens. For specifications of a Projection
Lens, contact sales dealer where you purchased a projector.
2. For installation, refer to lens replacement and installation
manual.
NOTE;
When installing the lens, remove the cover cap in the
projector.
This projector is designed to project on a flat projection
surface.
ROOM LIGHT
Brightness in a room has a great influence on picture
quality. It is recommended to limit ambient lighting in
order to provide best image.
LENS SHIFT ADJUSTMENT
Projection lens can be moved up and down with motor-driven lens shift function. This function makes it easy to
provide projected image where you want. U/D ratio can be adjusted 10 : 0 ~ 1 : 1 (refer to figure below.). Refer
to P 21 for operation.
Highest (10 : 0)
Downloaded From projector-manual.com Christie Manuals
LENS INSTALLATION
POSITIONING PROJECTOR
10 : 0
COVER CAP
SCREEN
Lowest (1 : 1)
PREPARATION
1
1
9