Preparation; Name Of Each Part Of Projector - Christie 38-VIV303-01 User Manual

PREPARATION

FRONT OF CABINET
PROJECTION LENS
LENS COVER
BACK OF CABINET
EXHAUST VENT
HOT AIR EXHAUSTED !
Air blown from exhaust vent is hot. When
using or installing a projector, following
precautions should be taken.
G Do not put a flammable object near this vent.
G Keep rear grills at least 3.3'(1 m) away from
any object, especially heat-sensitive object.
G Do not touch this area, especially screws
and metallic parts. This area will become
hot while a projector is used.
This projector detects internal temperature
and automatically controls operating power
of Cooling Fans.
BOTTOM OF CABINET
Downloaded From projector-manual.com Christie Manuals

NAME OF EACH PART OF PROJECTOR

TOP CONTROLS
AND INDICATORS
POWER CORD
CONNECTOR
SPEAKERS
TERMINALS
AND CONNECTORS
LAMP COVER
AIR INTAKE VENTS
This projector is equipped with cooling fans for protection from
overheating. Pay attention to following to ensure proper ventilation
and avoid a possible risk of fire and malfunction.
G Do not cover vent slots.
G Keep side clear of any objects. Obstructions may block cooling
air.
ADJUSTABLE FEET
AND
FEET LOCK LATCHES
AIR INTAKE
VENT
INFRARED
REMOTE RECEIVER
INFRARED
REMOTE RECEIVER
CARRYING
HANDLE
7