Table of Contents
Advertisement
Undercarriage:
Check to insure if properly aligned. No bent forks? Proper extension and
retraction? Any dirt in the forward fork pivot?
Any white areas or cracks in the wheel box? Remove the baggage area
floor panels and inspect the wheel box from above.
Undercarriage control circuit condition? Is there free play between
actuating lever and upper fork?
Function check: normal and emergency operation.
Tail wheel:
Any cracks or white patches around the attachment?
Is the tail wheel fork bent?
Ballast box in the fin
Check especially after a ground loop if the rod which secures the ballast
weights is bent and if the locking mechanism is still working properly.
Check also the GFRP parts of the box.
Function check according to section 1.9.1 and 1.9.3.
Horizontal tailplane-stabilizer:
Outer skins: Crushing, cracks, delaminations?
Mounting: Glued joint of the bushes, white areas around bushes, cracks in
shear webs, cracks around locking plate?
Hinge mounts: checked?
Elevator:
Crushing, cracks, delaminations?
Hinge mounts checked? - Control surface horn bent or loose?
Execute all checks of the daily inspection see flight manual section 4.3.
Issued: October 2010
Copyright DG Flugzeugbau GmbH - any copy or publishing prohibited
Manual valid with the up-to-date cover page only
Maintenance Manual DG-1000M
2.5
Advertisement
Table of Contents
