Table of Contents
Advertisement
Failure messages:
Extension-retraction unit fuse blown (Y/N)
Fire- warning (Y/N)
Generator failure (Y/N)
Spindlemotor-brake failure (Y/N)
Propeller brake failure (Y/N)
Water pump failure (Y/N)
Engine speed sensor failure (Y/N)
Fuel pump failure (Y/N)
Ignition coil 1 failure (Y/N)
Ignition coil 2 failure (Y/N)
Fuel pressure warning (Y/N)
Stall warning (Y/N)
Canopy warning (Y/N)
Intake air sensor failure (Y/N)
Slip warning (Y/N) (for drive belt slip)
Verifying the messages:
Engine speed limit exceeded acknowledge (Y/N)
Engine overheating acknowledge (Y/N)
EGT over temperature acknowledge (Y/N)
Low temperature warning acknowledge (Y/N)
Low voltage warning acknowledge (Y/N)
Over voltage warning acknowledge (Y/N)
Fuel reserve warning acknowledge (Y/N)
Airbrake warning acknowledge (Y/N)
Gear warning acknowledge (Y/N)
Fuel gauge failure acknowledge (Y/N)
CHT – sensor failure warning acknowledge (Y/N)
EGT – sensor failure warning acknowledge (Y/N)
Slip warning acknowledge (Y/N) (for drive belt slip)
Communication failure with control unit acknowledge (Y/N)
Proximity switch failure acknowledge (Y/N)
Control unit over temperature warning acknowledge (Y/N)
Ext.-retr.-unit fuse failure acknowledge (Y/N)
Fire warning acknowledge (Y/N)
Generator failure acknowledge (Y/N)
Spindlemotor brake failure acknowledge (Y/N)
Propeller brake failure acknowledge (Y/N)
Water pump failure acknowledge (Y/N)
Issued: October 2010
Copyright DG Flugzeugbau GmbH - any copy or publishing prohibited
Manual valid with the up-to-date cover page only
Maintenance Manual DG-1000M
9.5
Advertisement
Table of Contents
