Canon MVX460 Instruction Manual page 111

Problem
"SET THE TIME ZONE,
DATE AND TIME" appears on
the screen.
The wireless controller will not
work.
Video noise appears on
screen.
Video noise appears on the
TV screen.
Recording on the Tape
Problem
Image will not appear on the
screen.
Pressing the start/stop button
will not start recording.
Sound is distorted.
Sound is recorded in a lower
level than the actual level.
Playback of the Tape
Problem
During playback there is
video noise.
Pushing the joystick towards
/ does not start
playback.
Image will not appear on the
TV screen.
Tape is running, but image will
not appear on the TV screen.
No sound from the built-in
speaker.
Downloaded From VideoCamera-Manual.com Manuals
Set the time zone, date and time.
Replace the backup battery with a new lithium button battery
CR1616. After replacing the backup battery set the time zone,
date and time again.
Set [WL.REMOTE] to [ON].
The battery of the wireless controller is exhausted. Replace
the battery.
When using the camcorder in a room where a plasma TV is
located, keep a distance between the camcorder and the
plasma TV.
When using the camcorder in a room where a TV is located,
keep a distance between the compact power adapter and the
power or antenna cables of the TV.
Set the switch to CAMERA.
Open the lens cover.
Set the switch to CAMERA.
Load a cassette.
Tape reached the end ("
Rewind the tape or replace the cassette.
Cassette is protected ("
the position of the protect switch.
When recording near loud sounds (such as fireworks, drums
or concerts), sound may become distorted.
When recording near loud sounds (such as fireworks, drums
or concerts), sound may be recorded not in the actual sound
level.
Video heads are dirty. Clean the video heads.
Set the switch to PLAY.
Load a cassette.
Tape reached the end ("
Rewind the tape.
Check again that the camcorder is properly connected to the
TV.
TV/VIDEO selector on the TV is not set to VIDEO. Set the
selector to VIDEO.
Video heads are dirty. Clean the video heads.
You attempted to play back or dub copyright protected tape.
Stop playback/dubbing.
Speaker volume is turned off. Adjust the volume with the
[SPEAKER VOLUME] option of the FUNC. menu.
Solution
Solution
END" flashes on the screen).
" flashes on the screen). Change
Solution
END" flashes on the screen).
Set [AV DV] to [OFF].
25
22,
E
25
67
21
–
–
27
27
17
17
118
–
–
120
37
17
37
93
41
41
120
–
40
111